Icom IC-410PRO UHF Radio
Icom IC-410PRO UHF Radio - Image 2

Icom IC-410PRO UHF Radio

$399.00 Inc GST

Out of stock

Category:

Price includes SAFA channel programming, including extra channels for flying clubs all around the country. .

ICOM IC-410PRO

1W / 5W / 25W Output Power

5W output power (CB). Approved for 25W when using licensed private/commercial frequencies within 450-520MHz*

*ACMA Licensed users only

80+ Channels

80 Channel UHF CB* plus up to 35 Private Channels.**

*80 Channel UHF CB, 61-63 not present, reserved for future use.

**Must be enabled using CS-410PRO software.

Active Noise Cancel Microphone

This feature allows clear communication by reducing the surrounding noise, especially the unwanted low frequency noise received by the microphone. Active noise cancel is available only with HM-211.

CB / Commercial Use

The Compact and Rugged construction makes this product ideal for use in
Commercial environments.

Other Features

  • Easy to see White backlit LCD display
  • Exclusive automatic repeater scan easily finds local repeaters
  • Rugged MIL SPEC construction provides shock & vibration resistance
  • Silent Stand-by with CTCSS & Selcall
  • Front mounted speaker for clear sound

General

IC-410PRO
Frequency coverage 476.4250 – 477.4125 MHz (CB)

450.0000 – 520.0000 MHz (LMR)
Number of channels 128 Ch
Type of emission CB   :  8K50F3E (12.5 kHz)

LMR:  8K50F3E (12.5 kHz) / 16K0F3E (25 kHz)
Antenna impedance 50 Ω nominal
Operating temperature range – 30℃ to +60℃
Power supply voltage 13.8 V DC
Current drain
(approx.)		 Tx 25 W 7.0 A
5 W 4.0 A
Rx Max. audio 1200 mA
Stand-by 300 mA
Dimensions
(projections not included; W×H×D)		 150×40×117.5 mm
Weight (approx.) 0.8kg

Transmitter

IC-410PRO
RF output power 5W / 1W (CB)

25 / 5W / 1W (LMR)
Modulation Variable reactancne frequency modulation
Maximum permissible deviation ±2.5 kHz (Narrow)

±5.0 kHz (Wide)
Frequency error ±2.50 ppm

Receiver

IC-410PRO
Sensitivity at 12dB SINAD 0.25 μV typ.
Audio output power 4.0 W typ. at 5 % distortion with 4 Ω load

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

 

Standard MIL-810 F
Method, Proc.
Low Pressure Storage 500.4 I
Low Pressure Operation 500.4 II
High Temperature Storage 501.4 I
High Temperature Operation 501.4 II
Low Temperature Storage 502.4 I
Low Temperature Operation 502.4 II
Temperature Shock 503.4 I
Solar Radiation 505.4 I
Humidity Induced 507.4
Settling Dust 510.4 III
Vibration 514.5 I
Shock Functional 516.5 I
Shock Transit Drop 516.5 IV

Also meets equivalent MIL STD 810 -C, -D and -E.
All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • Microphone HM-152
  • Microphone hanger and screw set
  • Microphone hanger cable
  • DC power cable
  • Mounting bracket

Related products